スクリプトのルックアップテーブル(LUT)の変更

スクリプトのルックアップテーブルは、ファイルまたはデバイスの色空間間の変換を制御する曲線です。 Nukeの内部色空間。カーブエディタでは、x軸は入力ピクセル値を表し、y軸は出力ピクセル値(0-1の範囲に正規化された)を表します。LUTを適用する場合、 Nuke x軸に沿って入力値を検索し、y値が出力するものを決定します。

Nuke以下を含む多くのnuke-default LUTを提供します: linearsRGBrec709Cineon1 The Cineon conversion is implemented as defined in Kodak’s Cineon documentation., Gamma1.8, Gamma2.2, Panalog2 The Panalog LUT is based on a log2lin conversion with a blackpoint of 64, whitepoint of 681, and a gamma of 0.89. REDLog3 The REDLog LUT is based on a log2lin conversion with a blackpoint of 0, whitepoint of 1023, and a gamma of 1.022.,ViperLog4 The ViperLog LUT is based on a log2lin conversion with a blackpoint of 0, whitepoint of 1023, and a gamma of 1.0., AlexaV3LogC5 The Alexa LogC LUT uses the formula provided by ARRI., PLogLin6 The PLogLin LUT uses the default values for the formula, mapping log 0.43457 (code value 445 on a 1024 scale) to linear 0.18 (mid-gray) assuming a negative gamma of 0.6 and a density per code value of 0.002. (This does factor in the fact that value ranges for a log image in Nuke are still scaled to 0-1 range.), SLog7 The Sony S-Log LUT comes from the Sony S-Log Whitepaper Version 1.110. For more information, see http://www.sony.co.uk/res/attachment/file/66/1237476953066.pdf. , そして REDSpace8 The REDSpace LUT is implemented as defined in a curve provided by RED..

また、無制限の数の追加LUTを作成し、スクリプトの設定で既存のLUTを編集または削除できます。

デフォルトでは、 Nuke特定のファイルタイプまたはデバイスに特定のLUTを使用します。ほとんどの場合、これらのデフォルトに触れる必要はありません。ただし、デフォルトを変更する必要がある場合があります。たとえば、Panalogなどのカスタムカラースペースで記録するカメラで素材を撮影した場合などです。このような場合、スクリプトの設定でデフォルトを変更して、各読み取りノードまたは書き込みノードの色空間を変更する必要がないようにすることができます。

特定の個々の画像の読み取りまたは書き込みにデフォルトのLUTを使用したくない場合は、対応する読み取りまたは書き込みノードのコントロールで使用するLUTを選択できます。