Cook Interface (OpScript)¶

Provides a unified interface for querying and manipulating the scene graph.

Its methods can be broadly divided into two categories:

Functions that query the incoming, or upstream, scene graph. These functions provide read-only access to the incoming scene graph.
Functions that modify the output scene graph, observable after executing this Op. This involves creating new scene graph locations, modifying attributes of incoming scene graph locations, or deleting locations entirely.

Attributes¶

Information¶

Interface.GetAttr(string attrName[, string inputLocationPath, int inputIndex])¶

Returns the specified attribute on the Op’s input. It is often necessary to perform some action or compute a value based on the result stored in another attribute. The GetAttr() function allows you to interrogate any part of the incoming scene graph by providing the attribute name and a scene graph location path (either absolute or relative).

By default GetAttr() will return the specified attribute on the Op’s default input. In most cases where the Op only has one input branch this will suffice. If the Op has multiple inputs (e.g. the Merge node) the inputIndex parameter can be used to specify a particular branch. When specified, inputIndex must satisfy 0 <= inputIndex < GetNumInputs().

Note

It is important to remember that GetAttr() will only interrogate the Op’s input scene graph. Calls made to SetAttr() will not be visible to GetAttr(). If you need to see what attributes have been set during an Op’s execution you should call GetOutputAttr().

Parameters:	attrName – The name of the attribute. inputLocationPath – The input location path the attribute should be retrieved from. inputIndex – The input index the attribute should be retrieved from.
Returns:	The attribute at the specified location path and input index.

See also

GetNumInputs(), GetOutputAttr()

Interface.GetOutputAttr(string attrName)¶

Returns the specified attribute on the Op’s output for the current location.

This is useful for inspecting the output attributes set during an ExecOp() that may potentially require further processing after the exec’d Op has returned.

Note

This is not recommended for normal usage.

Parameters:	attrName – The name of the attribute to query.
Returns:	The attribute set on the Op’s output. If not set `nil` will be returned.

Interface.GetGlobalAttr(string name[, string inputLocation, int inputIndex])¶

Returns attribute from the input scene, including inherited attributes.

Parameters:	name – The name of the attribute. inputLocation – The location at which the attribute should be found. inputIndex – The input index of which to search for the input scene graph location.
Returns:	The specified attribute at the given location including inherited attributes.

Interface.GetBoundAttr([string inputLocationPath, int inputIndex])¶

Returns the bound attribute at the specified input scene graph location.

Parameters:	inputLocationPath – The scene graph location to obtain the bound attribute from. inputIndex – The input index on which to find the scene graph location.
Returns:	A 6-element DoubleAttribute containing the bound attribute or `nil` if bounds do not exist at the specified location.

Interface.GetTransformedBoundAttrPoints(DoubleAttribute boundAttr, number sampleTime, number[16] xform) → number[8][3]¶

Returns the bounding box specified by the bound attribute boundAttr after being transformed by the 4x4 transform matrix xform.

Parameters:	boundAttr – A 6-element DoubleAttribute specifying the bounding box to be transformed. sampleTime – The sample time that the bounds attribute `boundAttr` should be sampled at. xform – A 4x4 transform matrix by which boundAttr will be transformed.
Returns:	A table of 8 3-valued tables representing the 8 transformed points of the bounding box.

Interface.GetTransformedBoundAttrMinMax(DoubleAttribute boundAttr, number sampleTime, number[16] xform) → number[3], number[3]¶

Returns the axis-aligned bounding box specified by the bound attribute boundAttr after being transformed by the 4x4 transform matrix xform.

Parameters:	boundAttr – A 6-element DoubleAttribute specifying the bounding box to be transformed. sampleTime – The sample time that the bounds attribute `boundAttr` should be sampled at. xform – A 4x4 transform matrix by which `boundAttr` will be transformed.
Returns:	Two 3-element tables that contain the transformed (x-min, y-min, z-min) and the transformed (x-max, y-max, z-max) values.

Interface.GetGlobalXFormGroup([string inputLocationPath, int inputIndex])¶

Returns the global transform as a GroupAttribute, where the immediate children represent all the entries from /root to the leaf which have an xform attribute present.

Note

If a collapsed 4x4 transform matrix is required, pass the result of this function to the XFormUtils.CalcTransformMatrixAtTime() function.

Parameters:	inputLocationPath – The input scene graph location to retrieve the global transform from. inputIndex – The input index from which to retrieve the scene graph location.
Returns:	The global transform at the specified location.

Manipulation¶

Interface.SetAttr(string attrName, Attribute attrValue[, boolean groupInherit])¶

Sets the specified attribute on the Op’s output.

attrName can be specified in dot-delimited form e.g. attr1.attr2.attr3, in which case a new GroupAttribute is created for each level required and the value of groupInherit will determine the GroupAttribute’s inheritance state.

Note

Calls to SetAttr() made in the current Op will not be reflected in subsequent calls to GetAttr(). This is because functions which mutate the scene graph only affect the output of this Op. Methods such as GetAttr() and DoesLocationExist() query the input to this Op. This is also true for non-local queries i.e., when an Op queries attributes of its parent. In this case it will be querying the input at its parent, and thus does see the results of its own processing. If you need to see the attributes set during a cook you should use GetOutputAttr().

Parameters:	attrName – The name of the attribute to create. This can be specified in dot-delimited form. attrValue – The Attribute instance to be associated with `attrName`. groupInherit – The group inheritance state for newly created GroupAttributes.

See also

GetOutputAttr()

Interface.CopyAttr(string dstAttrName, string srcAttrName[, boolean groupInherit=true, string inputLocationPath, int inputIndex])¶

Copies the specified source attribute to the specified destination attribute.

The specified source attribute (determined by inputLocationPath and inputIndex) will be copied to the output of this Op as dstAttrName. If the source attribute or location does not exist this call is equivalent to calling DeleteAttr() with the destination attribute.

Parameters:

dstAttrName – The name of the attribute to copy the attribute at srcAttrName to.
srcAttrName – The name of the attribute to copy to dstAttrName.
groupInherit – The group inheritance state of the destination attribute.
inputLocationPath – The scene graph location path on this Op’s input to copy from.
inputIndex – The input index to copy from (where multiple branches in the Op tree exist).

Interface.ReplaceAttrs([string inputLocationPath, int inputIndex])¶

Replaces the attributes on this Op’s output with those specified by the input scene graph location path.

Parameters:	inputLocationPath – The attributes at inputLocationPath will replace those on this Op’s output. inputIndex – The input index to use where multiple input branches exist for this Op.

Interface.ExtendAttr(string dstAttrName, Attribute value[, string srcAttrName='', boolean groupInherit=true, string inputLocationPath, int inputIndex])¶

Extends the existing input attribute with additional values if the types match.

If no input attribute exists with the specified name then this call is equivalent to SetAttr().

Multi-sampling is supported; the new attribute is constructed as the union of all incoming and new time samples, leveraging the FnAttribute’s existing interpolation.

If there is a type mismatch, it will be reported as a scene graph error. If more sophisticated or fine-grained type mismatch handling is required it is recommended to instead manually call GetAttr() / SetAttr()

Incoming NullAttribute’s are equivalent to the attribute not being set in the incoming scene.

Parameters:

dstAttrName – The name of the attribute to be extended.
value – The Attributes that will extend the specified attribute.
srcAttrName – The name of the attribute a specified location to be extended, if empty string is used this is the equivalent of SetAttr().
groupInherit – The value of the group inheritance flag.
inputLocationPath – The input location path from which srcAttrName should be sourced from.
inputIndex – The input index to search for inputLocationPath on.

See also

SetAttr(), GetAttr()

Interface.DeleteAttr(string attrName)¶

Deletes the attribute specified by attrName so it will no longer on this Ops output.

Parameters:	attrName – The name of the attribute to delete from the Op’s output.

Interface.DeleteAttrs()¶: Deletes all attributes on this Op’s output.

Scene graph¶

Information¶

Interface.AtRoot()¶

Returns whether we are at the topmost location this Op has been cooked at. This is often, but not always, /root.

This is equivalent to testing if GetRootLocationPath() is the same as GetOutputLocationPath().

Interface.GetRootLocationPath()¶

Returns the scene graph location corresponding to the root of the Op’s execution.

This may or may not be /root, specifically in the case where ExecOp() is called beneath /root.

Returns:	The root of the Op’s execution.

See also

ExecOp()

Interface.GetInputLocationType([string inputLocationPath, int inputIndex])¶

Returns the location type for specified location on the corresponding input.

Parameters:	inputLocationPath – The scene graph location path. inputIndex – The input index on which to retrieve the specified scene graph location path.
Returns:	The location’s `type` attribute. If type attribute is not present, an empty string will be returned, if it is not set then `group` will be returned by default.

Interface.GetInputName()¶

Returns the leaf name for the input location.

This will typically match GetOutputName(), but may differ when CopyLocationToChild() is used.

Returns:	The leaf name for the input location.

See also

CopyLocationToChild()

Interface.GetInputLocationPath()¶

Returns the scene graph location path corresponding to the input scene graph location that is currently being traversed.

Returns:	The input scene graph location that is currently being traversed.

Interface.GetRelativeInputLocationPath()¶

Returns the relative location path corresponding to the input scene graph location that is currently being traversed.

Returns:	The relative location path corresponding to the input scene graph location that is currently being traversed.

Interface.GetAbsInputLocationPath(string inputLocationPath)¶

Resolves a relative input scene graph location path to an absolute path.

This method cannot be used to query output locations (such as those used with methods such as CreateChild()) but those methods that operate on the Op’s output such as GetAttr(). If you require the absolute scene graph location path for an output location you should use GetAbsOutputLocationPath().

Parameters:	inputLocationPath – The relative input scene graph location path.
Returns:	The corresponding absolute location path.

See also

GetAbsOutputLocationPath()

Interface.GetOutputName()¶

Returns the leaf name for the output location.

Example: /root/world/geo -> geo

Returns:	The leaf name of the output location.

Interface.GetOutputLocationPath()¶

Returns the output scene graph location path in its absolute form.

The output scene graph location path is the scene graph location that is currently being cooked.

Example: /root/world/geo

Returns:	The absolute output scene graph location path.

Interface.GetRelativeOutputLocationPath()¶

Returns the location path relative to the root execution location currently being traversed.

For Ops instantiated at document level:

"/root" -> ""
"/root/world" -> "world"
"/root/world/geo" -> "world/geo"

For an Op first executed at /root/world/geo (producing “a/b”)

"/root/world/geo" -> ""
"/root/world/geo/a" -> "a"
"/root/world/geo/a/b" -> "a/b"

Returns:	The location path relative to the root execution location currently being traversed

Interface.GetAbsOutputLocationPath(string outputLocationPath)¶

Resolves a relative output scene graph location path to an absolute path.

This method cannot be used to query input locations (such as those used with methods such as GetAttr()) but those methods that operate on the Op’s output such as CreateChild(). If you require the absolute scene graph location path for an input location you should use GetAbsInputLocationPath().

Parameters:	outputLocationPath – The relative output scene graph location path.
Returns:	The corresponding absolute location path.

See also

GetAbsInputLocationPath()

Interface.DoesLocationExist([string inputLocationPath, int inputIndex])¶

Returns true if the specified location exists on the Op’s input.

Parameters:	inputLocationPath – The scene graph location path. inputIndex – The input index that should be searched.
Returns:	`true` if the location exists at the specified location and index otherwise false.

Interface.GetPotentialChildren([string inputLocationPath, int inputIndex])¶

Returns a StringAttribute containing list of names of potential children on input.

The ability for Ops, via DeleteSelf(), to delete themselves gives rise to a subtle behavior. When an upstream Op is evaluated and creates children, if downstream Ops have the ability to delete them, the upstream Op can only go so far as to state that the children it creates may potentially exist after a downstream Op has been evaluated at those child locations. This is because the Op has no knowledge of what a downstream Op may do when evaluated at such a location. To that extent, GetPotentialChildren() returns a list of all the children of a given location on the input of an Op.

Parameters:	inputLocationPath – The input location path to obtain the potential children for. inputIndex – The input index to be used.
Returns:	A StringAttribute containing the potential children at the specified input location.

Manipulation¶

Interface.ResetRoot()¶

Marks this location as the new root location in the Op’s traversal.

Subsequent calls to GetRelativeOutputLocationPath() at child locations will return paths relative to this one.

Note

Calls to GetRelativeOutputLocationPath() at the current location will remain unaffected by this function.

Interface.CreateChild(string name[, string opType='', Attribute|nil args, ResetRootMode resetRoot=ResetRootMode.Auto])¶

Creates a new child at the specified location if one didn’t already exist.

If the child already exists in the incoming scene then the Op will be run and previously created attribute values and children will be preserved. To ensure the child will not have any pre-existing attributes or children it is recommended to first call DeleteChild(), doing so will maintain the original child index ordering.

If the Op type is not specified or is an empty string the calling Op’s type will be inherited by the child.

To modify the result of GetRelativeOutputLocationPath() in calls beneath this location the resetRoot argument can be set. If ResetRootMode.Auto is specified then the child’s root location will be reset if and only if the Op’s type differs from the parent’s.

Note

Multiple calls to CreateChild() for the same named child location causes the last specified opType to be used, that is to say, successive calls to CreateChild() mask prior calls.

Parameters:	name – The name of the child to create. opType – The type of the Op that will be evaluated at the child location. If an empty string or nothing is specified then the current Op’s type will be used. args – The Op arguments that will be passed to the Op when run at the child location. resetRoot – Specifies what the root location for Ops run at child location should be.

See also

ResetRoot()

Interface.ReplaceChildren([string inputLocationPath, int inputIndex])¶

Replaces the children under the Op’s current scene graph location with children from an alternate input location and/or input index.

Parameters:	inputLocationPath – The input scene graph location whose children will replace this location’s children. inputIndex – The input index on which the where the input location path should be retrieved.

Interface.CopyLocationToChild(string child[, string inputLocationPath, int inputIndex, string orderBefore])¶

Copies the specified location in the input scene, to the specified child location.

The specified inputLocationPath will not be evaluated until the new child location is traversed. At this time, if the input does not exist, neither will the new child.

CopyLocationToChild() can be used to rename a child location:

CopyLocationToChild(dst, src, InputIndex.Default, src)
DeleteChild(src)

The inputLocationPath always refers to the input name, and child refers to output name, so multiple CopyLocationToChild() calls are unambiguous.

Parameters:	child – The name of the child to be copied to the output of this Op. inputLocationPath – The input scene graph location path to copy. inputIndex – The input index to copy the `inputLocationPath` from. orderBefore – The child that this should be precede in the scene graph ordering.

Interface.RenameChild(string src, string dst)¶

Renames the specified child.

Parameters:	src – The name of the child to rename. dst – The new name of the child.

Interface.DeleteChild(string name)¶

Deletes the specified child location on the Op’s output.

Parameters:	name – The name of the child location to delete.

Note

Calling DeleteChild() is more efficient than allowing the child location to delete itself. Where possible you should prefer DeleteChild() over DeleteSelf().

Interface.DeleteChildren()¶: Deletes all children on this Op’s output, both newly created by the current Op and any incoming children.

Interface.DeleteSelf()¶

Deletes the current output location.

It is common to return immediately following this call.

Note

Calls to DeleteSelf() will not remove the location from the location’s parent GetPotentialChildren() list. Thus, if there is a way to structure code to use DeleteChild() instead, it is generally preferable.

Enumerations¶

Interface.ResetRootMode¶

Controls which root scene graph location will be used for Ops when run at child locations.

ResetRootMode.Auto¶: The root location is reset only if opType is different to the Op calling CreateChild().

ResetRootMode.True¶: The root location of the Op evaluated at the new location is reset to the new location path.

ResetRootMode.False¶: The root location of the Op evaluated at the new location is inherited from the Op that called CreateChild().

Interface.InputIndex¶

InputIndex.Null¶: Special value returned by GetInputIndex() when the current location does not exist in the incoming scene.

InputIndex.Default¶: Special value that can be specified to GetAttr() and many other Cook Interface functions. It indicates the operation should apply to the “default” index. This is defined as the input index in which the current location was created (by CreateChild(), CopyLocationToChild() or ReplaceChildren()).

Traversal¶

Interface.ReplaceChildTraversalOp(string opType, GroupAttribute args)¶

Replaces the Op type and Op arguments for child locations of this Op.

Newly created child locations (created with CreateChild()) only have access to the Op arguments and type they were created with originally. Conceptually, this is the type and Op arguments used when traversing locations in the incoming scene.

Parameters:	opType – The Op type that will be evaluated at child locations. args – The arguments that will be passed to the Op when run at the child locations.

Interface.StopChildTraversal()¶: Stops this Op from running at descendants of the current location.

Graph State¶

Interface.GetCurrentTime()¶

Returns the current time from the current Graph State.

Returns:	The current time.

Interface.GetShutterOpen()¶

Returns the shutter open time from the current Graph State.

Returns:	The shutter open time.

Interface.GetShutterClose()¶

Returns the shutter close time from the current Graph State.

Returns:	The shutter close time.

Interface.GetNumSamples()¶

Returns the number of time samples from the current Graph State.

Returns:	The number of time samples.

Interface.GetGraphStateVariable(string variableName)¶

Returns the specified variable from the current Graph State.

Parameters:	variableName – The name of the Graph State Variable.
Returns:	The Graph State Variable specified by `variableName`.

Error Reporting¶

Interface.ReportError(string message)¶

Reports the specified error message to the scene graph at the current scene graph location.

Parameters:	message – The error message.

Interface.ReportWarning(string message)¶

Reports the specified warning message to the scene graph at the current scene graph location.

Parameters:	message – The warning message.

Miscellaneous¶

Interface.Prefetch([string inputLocationPath, int inputIndex])¶

Indicates to the Runtime that the caller depends on the specified location.

Calling the Prefetch() function instructs the Runtime that the specified location is required for the Op’s processing task.

The Prefetch() function will return immediately, scheduling the computation of the requested location to be cooked concurrently or at some point in the future.

Prefetch() is recommended if your Op makes multiple scattered queries during a cook. Note that it is not necessary to prefetch parent locations of your default input.

The use of a prefetch creates a data flow dependency, so do not prefetch locations or inputs you do not need.

Parameters:	inputLocationPath – The scene graph location path to be prefetched. inputIndex – The input index from which to request the specified `inputLocationPath`. In common cases the default input will suffice, however if your Op has multiple input branches (like a Merge Op) you will need to specify a particular input index.

Interface.GetOpType()¶

Returns the type of this Op.

Returns:	A string containing the Op’s type. In OpScript, this returns `OpScript.Lua`.

Interface.GetOpArg([string argName])¶

Returns the specified Op argument or all Op arguments if an empty string is provided.

Op arguments are passed to the Op to configure how it should run. Op arguments are stored in a GroupAttribute. This method allows you to query the Op arguments available to this Op.

If you supply an argument name this can be in the dot-delimited form i.e. a.b.c or the single name form.

:param argName The dot-delimited name of the Op argument. :returns: An instance of Attribute containing the Op argument.

Interface.ExecOp(string opType, GroupAttribute opArgs)¶

Runs the specified Op with the provided arguments at the current location.

Children created as a result of the ExecOp() call will behave as expected in such that they will retain the type and Op arguments of the exec’d Op.

Parameters:	opType – The type of Op to be run. opArgs – A GroupAttribute describing the arguments that will be passed to the Op when run.

Interface.GetNumInputs()¶

Returns the number of input branches this Op has.

An Op can have the output from multiple other Ops as its input. Obvious use cases for this are instances where you wish to merge multiple scene graphs produced by different OpTrees into a single scene graph, comparing attribute values in two scene graph states, or copying one scene graph into another one. The GetNumInputs() function allows you to determine how many Ops you have as inputs, which is a precursor to interrogating different branches of the OpTree for scene graph data.

Returns:	The number of inputs this Op has.

Interface.GetInputIndex()¶

Returns the input index this scene graph location was created in.

In most cases GetInputIndex() will return 0. This reflects the fact that most Ops operate on the default input or branch. It can also return a special value of InputIndex.Null if the current location doesn’t exist in the incoming scene.

In specific cases, such as in a Merge Op, GetInputIndex() may return an index > 0. Certain locations may be present only in additional input scenes, but not in the first (connected) input scene. Those locations are created in the output scene, and are then cooked by subsequent cooks of the Merge Op. For those locations, the Runtime keeps track of the index of the scene in which they were created. This index is returned by GetInputIndex(). This value allows the Merge Op to know which input scene a particular location came from, and is used for performance optimizations when certain circumstances apply.

Returns:	The input index this location was created on.

See also

InputIndex