Contact Support

New Project Dialog

The New Project dialog is described below with functions for how to access it. A list of the controls on the dialog box can be found in the table below.

What It Does

The New Project dialog lets you select geometry and various options for a new Mari project. Use the Path control to select an .obj, .ptx, .abc, or .fbx file you want to use in the project.

Resize the dialog box to display long filenames or select multiple files to display more than one geometry, if they are of the same file type. Mari checks the model for any errors that might prevent it from processing, for example, whether UVs overlap or touch border edges. A Mesh Sanity Check dialog displays any warnings or errors. (Errors cancel opening the model, but you can continue with warnings.)

Depending on the size and complexity of textures, it can take several minutes the first time you load them into a Mari project. Once saved, however, the project should open quickly in future.

How to Access It

Menubar | File > New

Keyboard | Ctrl/Cmd+N

Projects tab | New button

Projects tab | Right-click > New

Toolbar |

New Project Dialog Box Fields

Control

Type

What it does

Opens this dialog box

Notes

Project Name

entry box

Lets you specify the name of the project.

 

This is for you to identify the project only (this is not a filename).

Geometry

Path

entry box, dropdown, button

Opens .obj, .ptx, .abc, or .fbx files. Dropdown lists the last 10 opened.

Once you select a file, the Mesh options appear under the root Path.

Pick Mesh dialog

Select by either typing the Path, selecting from the dropdown of the last 10 files selected, or clicking the button to browse to a file.

Mesh options | Mapping Scheme

dropdown

If there is a UV map available, and you would like to use it, select UV if available, Ptex
otherwise
. If you prefer to use Ptex, select Force Ptex. This option loads the selected geometry and replaces the existing UV map with a Ptex map.

 

Only available when choosing .obj, .abc, or .fbx files in the Path.

Mesh options | Selection Groups

dropdown

Selection groups have two options, to either:

Create From Face Groups - this is the default behavior and allows the use of selection groups in Mari.

Don’t Create - if you choose not to create a selection group, Mari does not create any from the file.

 

Only available when choosing .obj files in the Path.

Mesh options | Multiple Geometries Per Object

dropdown

If your .obj consists of multiple geometries, you have the option to Merge Geometries Into One, which is the default behavior, or Create Separate Geometries (Ptex Only). If you select Merge Geometries Into One, Mari combines the individual geometries into a single geometry, while selecting Create Separate Geometries (Ptex Only) creates individual geometries.

 

Only available when choosing .obj files in the Path.

Even if you select Create Separate Geometries (Ptex Only), Mari only displays a single geometry on the canvas. However, when you export a channel you have the option to export individual .ptx files for each geometry.

Mesh options | Start Frame and End Frame

entry box

Set the frame range from the source file to import.

 

Only available when you are loading an animated sequence using the .obj, .abc, or .fbx formats.

Mesh options | Single Frame

button

Sets the other fields to only import the first frame from the animation in the object file.

 

Only available when you are loading an animated sequence using the .obj, .abc, or .fbx formats.

Mesh options | All Frames

button

Sets the other fields to import the entire animation from the object file.

 

Only available when you are loading an animated sequence using the .obj, .abc, or .fbx formats.

Mesh options | Merge Type

dropdown

For Ptex files, there are two choices for the geometry mesh options:

Separate Meshes - creates only one object with one geometry.

Single Mesh - creates only one object, but has multiple geometries within it.

 

Only available when choosing .ptx files in the Path.

The option to Separate
Geometry In One Object
is essentially the inverse of the Ptex channel export process, and allows project reconstruction.

Mesh options | Merge Type dropdown

Choose whether to merge selected items from the objecthierarchy tree as:

Single Mesh - merges selected geometry into one single mesh in a GeoEntity.

Note:  Note that this implies that the information about the original geometries cannot be accessed once the merge is done.

Just Merge Nodes - merges selected geometry into one GeoEntity while retaining the metadata and mesh information about the original individual geometries.

Note:  This information can only be accessed by more technical artists using the C API. see, Software API Overview.

 

Only available when choosing .abc or .fbx files in the Path.

Mesh options |Merge Selection Groups

 

You can choose to Merge selection groups with the same name or choose the Do not merge selection groups option.

 

For more information on selection groups, see Selection Groups.

Mesh options |Take

dropdown, information

If an object has been exported as part of an .fbx file with animation takes, the takes are shown in the dropdown menu. Otherwise, information regarding the only take available is shown.

 

Only available when choosing .fbx files in the file browser. When adding an object with animation takes, the take can only be selected on import and cannot be changed at a later point.

Mesh options | Scene

information

In the object hierarchy, shows all the geometries or meshes, cameras, and groups that are part of the selected Alembic file.

Expanding the parent row, reveals the child geometries beneath it.

 

Only available when choosing .abc or .fbx files in the Path.

Mesh options | Merge

checkbox

Select the checkbox to determine if a geometry is to be merged with another on project creation.

 

Only available when choosing .abc or .fbx files in the Path.

For more information on merging Alembic or FBX geometry, see Creating a New Project with Alembic and FBX Files

Mesh options | Frame Offset

entry box

Set by how many frames to offset the loading of an animated object. You can specify a frame range, or simply a number of frames.

 

Only available when choosing .abc files in the Path.

 

Channels

Root Path

dropdown, button

Displays the root path for the project. This is where Mari looks for any existing textures to import as it creates the channels.

Choose Base Path dialog

This is the value that Mari substitutes for $PATH in the import templates in the bottom list.

Scan

button

Scans the Root Path for any existing texture files.

 

After scanning the Root Path, you should always set the Size of the texture files manually. The default values Mari sets may not be correct as channels can contain many different patch sizes.

Category

dropdown

Selects a Mari channel preset template from the list of available shaders.

 

AiStandard - VFX, BRDF - Games, BRDF - VFX, General, Principled BRDF - Metallic - Games, Principled BRDF - Metallic - VFX, Principled BRDF - Non Metallic - Games, Principled BRDF - Non Metallic - VFX, Unreal - Metallic - Games, Unreal - Metallic - VFX, Unreal - Non-Metallic - Games, Unreal - Non-Metallic - VFX, VRayMtl - VFX

Template

dropdown

Specifies a channel template to control the format of the filenames when Mari looks for existing textures on disk.

 

For more information about channel templates, see Defining Custom Channel Templates, Reviewing the Custom Channel Template File Format, and Example File: DefaultTemplates.mtt.

Prefix

entry box

Specifies the filename prefix for existing texture files, if applicable.

 

 

Create

checkbox

When enabled, creates a shader and connects channels to the shader on project creation.

 

Most presets contain enabled channels by default.

Import

checkbox

Imports existing textures into the channel after creating it.

 

 

Name

information

Specifies the name of the channel to create. Mari sets a default value, but you can change this.

 

For example, color, specRough, dispFine, dispBroad, colorDetail, colorDetailMask.

Size

dropdown

Specifies the patch size for the new channel. Mari sets a default value, but you can change this.

 

256x256, 512x512, 1024x1024, 2048x2048, 4096x4096, 8192x8192, 16384x16384, 32768x32768

Colorspace

dropdown

The colorspace in which the colors within your project are interpreted. Either select from the shipped config files or allow Mari to set an Automatic colorspace.

 

You can change these settings within the project after project creation, if necessary.

File Space

dropdown

Specifies the file space used when generating vectors. Mari sets a default but you can change this.

 

Normal, Vector, Vector (flipped Y), or Normal (flipped Y)

Fill

swatch

Specifies the color to fill the new channel. Mari sets a default value, but you can change this.

 

Click the swatch to change the color.

Depth

dropdown

Specifies the color depth size. Mari sets a default value, but you can change this.

 

8bit (Byte), 16bit (Half), or 32bit (Float).

Files

entry

Specifies the filename template used to pick existing textures to import into the channel. Mari sets a default value, but you can change this, or you can use the button to open a dialog allowing you to manually pick the files.

 

This option is ignored if the Import checkbox is disabled.

button

Opens a dialog box allowing you to pick the textures for Mari to import into the new channel.

Import Dialog

 

image

Indicates that Mari has not found any textures to import.

 

If there are textures to import, Mari displays the number of patches available.

Color Settings

Note:  All of the following Colorspace options can also be changed after project creation, if you decide you no longer want to use the colorspace setting that was chosen during project creation.

Color Management Enabled

checkbox

Enables or disables the OpenColorIO color management.

 

 

OCIO Config

dropdown

A list of either user-defined config files (Custom) or shipped OpenColorIO config files that handle colorspace.

 

 

Custom OCIO Config

entry box, button

If you chose Custom for the OCIO Config file choice, specify the filepath to the config file.

 

 

Monitor

dropdown

The default colorspace, which applies to thumbnails and UI elements.

Typically, this should be the same colorspace as you intend to use for the canvas.

 

 

Color Picking

dropdown

The colorspace for all color pickers, swatches, and image viewers.

 

 

8 bit Data

dropdown

The default colorspace for 8-bit channels, and reading and writing image files with 8-bit data.

 

 

16 bit Data

dropdown

The default colorspace for 16-bit channels, and reading and writing image files with 16-bit data.

 

 

8 bit Scalar

dropdown

The default colorspace for masks, heights, normals, depths and, generally, any non-color image with 8-bit data.

 

 

16/32 bit Float Data

dropdown

The default colorspace for 16- and 32-bit (float) channels, and reading and writing image files with 16- and 32-bit, floating point data.

 

 

Lighting

 

Shader

dropdown

Specifies the shading model from one of the following:

Current Shader

Current Channel

Current Layer & Below

Current layer

Current Paint Target

 

 

Lighting

dropdown

Specifies the lighting on the main mesh. Mari comes with five default modes for lighting the model, and optional shadow control:

Flat - a flat, uniform, directionless light.

Basic - basic diffuse lighting without specular.

Basic with Shadows - basic lighting with diffuse lighting, as well as shadows.

Full - full lighting with diffuse and specular lighting.

Full with Shadows - full lighting with diffuse and specular lighting, as well as shadows.

 

 

Active Light Count

entry box, slider

Specifies the number of active directional lights.

 

 

Environment Map

arrows, preview button, file browser, reset

Click the blank image space to choose an environment from the Mari Environment library. Clicking either of the arrow keys cycles backwards or forwards through the Mari Environment library, loading the image as it does.

Clicking the file browser opens the Open an Image dialog. Select an image of any of the file formats listed in the File of Type field.

You can also drag-and-drop an image from a file browser onto the blank image space to load the image as an environment light.

 

For more about the options in the dialog, refer to Open an Image Dialog.

Create New Project

button

Creates and opens the new project.

 

 

Cancel

button

Cancels the new project creation.