Mari 4.5v2 docs:

Projectors Palette

The Projectors palette and the controls that can be found on it are described in the table below. When controls also bring up additional dialogs, these are referenced for more information.

What It Does

The Projectors palette displays the projectors in your project, and allows you to:

• Create, load, save, and delete projectors.

• Use a projector to take a snapshot of the current view.

• Use a projector to project an edited snapshot back onto the model's surface.

Projectors Palette Fields

Control	Type	What it does	Opens this dialog box	Notes
	button	Creates a new projector.
	button	Saves the selected projector to disk.	Save Projector
	button	Loads a saved projector from disk.	Load Projector
	button	Deletes the selected projector.
<projector name> > General \| Name	entry box	Enter the name of the projector.		This identifies the projector at the top of the palette.
<projector name> > Action \| Frame Offset	entry box, slider	Set by how many frames to offset the loading of an animated object. You can specify a frame range, or simply a number of frames.
<projector name> > Action \| Import	button	Click to load the image from the file set in the Input File Path and project it as paint onto the model (without baking).	Pick Path (if Input File Path has not been specified)
<projector name> > Action \| Project	button	Click to load the image from the file set in the Input File Path and project and bake it onto the model.	Pick Path (if Input File Path has not been specified)
<projector name> > Action \| Input File Path	entry box	Enter the filename and path where the projector loads updated images from.
<projector name> > Action \| Unproject	button	Click to save the current view buffer out to the file set in the Output File Path.	Pick Path (if Output File Path has not been specified)
<projector name> > Action \| Output File Path	entry box	Enter the filename and path where the projector saves images to disk.
<projector name> > Import Colorspace \| Data Colorspace (advanced color management mode only) or Colorspace (intermediate color management mode only)	dropdown	Select the colorspace that is displayed on your screen.
<projector name> > Import Colorspace \| Working Colorspace (advanced color management mode only)	dropdown	Select the colorspace to use for painting, lighting, applying filters, and similar operations.
<projector name> > Import Colorspace \| Raw Data (advanced and intermediate color management modes only)	checkbox	When enabled, prevents the data from being converted to another colorspace.
<projector name> > Import Colorspace \| Scalar Data	checkbox	When checked, the data is considered as non-color data such as masks, heights, normals, and depths.
<projector name> > Export Colorspace \| Data Colorspace (advanced color management mode only)	dropdown	Select the colorspace that is displayed on your screen.
<projector name> > Export Colorspace \| Output Colorspace (advanced color management mode only) or Colorspace (intermediate color management mode only)	dropdown	Select the colorspace to use for the output.
<projector name> > Export Colorspace \| Raw Data (advanced and intermediate color management modes only)	checkbox	When enabled, prevents the data from being converted to another colorspace.
<projector name> > Export Colorspace \| Scalar Data	checkbox	When checked, the data is considered as non-color data such as masks, heights, normals, and depths.
<projector name> > Unprojection \| Clamp	checkbox	If this is checked, Mari restricts the range of the paint buffer to values between 0 and 1.
<projector name> > Unprojection \| Shader Used	dropdown	Select the shader you want the projector to take a screen snapshot of. By default, this is set to Current Paint Target.		Current Shader, Current Channel, Current Layer, Current Paint Target, and Current Layer and Below.
<projector name> > Unprojection \| Lighting Mode	dropdown	The lighting mode to use when taking a screen snapshot with this projector.		Flat, Basic, Full.
<projector name> > Unprojection \| Color Depth	dropdown	The color depth of the screen snapshots taken by this projector.		8bit (Byte), 16bit (Half), 32bit (Float).
<projector name> > Unprojection \| Size	dropdown	The size (in pixels) of the screen snapshots taken by this projector.
<projector name> > Painting \| Painting Mode	dropdown	Sets the paint blending mode.		The paint blending modes available are similar to many other paint packages. If you aren't familiar with the various modes, see Paint Blending Modes for descriptions and examples.
<projector name> > Projection \| Projection	dropdown	Sets whether Mari projects only onto the Front of the model (as you're seeing it) or whether paint goes straight Through the model (appearing on the back as well as the front).
<projector name> > Transformation \| Scale	entry boxes	Sets the scale of the projector.
<projector name> > Transformation \| Translation	entry boxes	Sets the translated position of the projector.
<projector name> > Transformation \| Rotation	entry box	Sets the rotation, in degrees, of the projector.
<projector name> > Update \| Update Global Settings From Projector	button	If you have adjusted any projection properties, click this button to see the effect of your changes in the canvas. When you do, the equivalent global projection properties in the Painting palette are also updated.		Updates all global projection properties.
<projector name> > Update \| Update Only Masks From Projector	button	If you have adjusted any projection mask properties, click this button to see the effect of your changes in the canvas. When you do, the equivalent global projection mask properties in the Palette palette are also updated.		Updates global projection mask properties only.
<projector name> > <projector name> > General \| Name	information	Name of the camera used for the projector.
<projector name> > <projector name> > General \| Animated	information	Whether the camera used for the projector is animated.		True, False.
<projector name> > <projector name> > Perspective \| FoV	entry box, slider	Enter the value for the field of vision. This controls how much Mari distorts the view when applying perspective. At 0, the perspective camera gives exactly the same view as the ortho camera. As the value increases, the distortion increases.
<projector name> > <projector name> > Perspective \| Near plane	entry box, slider	Enter the value for the near clipping plane. Mari doesn’t display parts of the scene that are closer than the Near plane.
<projector name> > <projector name> > Perspective \| Far plane	entry box, slider	Enter the value for the far clipping plane. Mari doesn’t display parts of the scene that are further than the Far plane.
<projector name> > Edge Mask > General \| Enabled	checkbox	Whether the edge mask is turned on or not.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Edge Mask > General \| Falloff Start	entry box, slider	Controls where the edge mask starts on the model. The higher the value, the more forward facing the masking starts. If this is higher than the FalloffEnd, areas facing the view are paintable, and areas oblique to the view are masked. If this is lower, facing areas are masked and oblique areas are paintable.		You need to click either of the update buttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Edge Mask > General \| Falloff End	entry box, slider	Controls where the edge mask ends on the model. The higher the value, the closer, more forward facing the mask finishes.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Edge Mask > General \| Falloff Curve	curve editor	Adjusts the falloff, using a curve editor to modify the falloff start and end point. To fine tun control over the falloff, add more points to the curve.		You need to click either of the update buttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Channel Mask > General \| Invert	checkbox	If this is selected, the mask data is black on white rather than white on black.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Channel Mask > General \| Mask Curve	curve editor	Adjusts the amount of masking on the channel, where white pixels are totally masked, black pixels are totally unmasked, and 50% gray is 50% masked.		You need to click either of the update buttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Channel Mask > General \| Mask Contrast	entry box, slider	The contrast applied to the original channel to derive the mask. At 1.0, the mask comes directly from the original channel. Lower values make the mask fuzzier than the input channel, higher values make it sharper than the input channel.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Channel Mask > General \| Mask Amount	entry box, slider	The strength of the mask effect.1.0 means that the mask absolutely controls where you can paint; the effects of the mask decrease as the value gets lower.		You need to click either of the update buttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Channel Mask > General \| Mask Channel	dropdown	Sets the channel holding the mask from a list of available channels in your project.		You need to click either of the update buttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Channel Mask > General \| Enabled	checkbox	Whether the channel mask is turned on or not.		You need to click either of the update buttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Ambient Occlusion Mask > General \| Invert	checkbox	If this is selected, the mask data is black on white rather than white on black.
<projector name> > Ambient Occlusion Mask > General \| Mask Curve	curve editor	Controls how the ambient occlusion pixel values relate to the degree of masking. The horizontal axis is the darkness of the occluded pixels (black to the left, white to the right), the vertical axis is the degree of visibility. By default, this is a direct line, where white pixels are totally masked, black pixels are totally unmasked, and 50% gray is 50% masked.
<projector name> > Ambient Occlusion Mask > General \| Mask Contrast	entry box, slider	The contrast applied to the ambient occlusion to derive the mask. At 1.0, the mask comes directly from the calculated ambient occlusion. Lower values make the mask fuzzier than the ambient occlusion, higher values make it sharper.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Ambient Occlusion Mask > General \| Mask Amount	entry box, slider	The amount of ambient occlusion masking to apply.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Ambient Occlusion Mask > General \| Enabled	checkbox	Whether the ambient occlusion mask is turned on or not.		You need to click either of the update buttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Depth Mask > General \| Enabled	checkbox	Whether the depth mask is turned on or not.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Depth Mask > General \| Falloff	entry box, slider	How fast the depth masking applies. Lower values make the mask apply slowly, higher values make it apply more quickly.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Depth Mask > General \| End	entry box, slider	The depth in the scene for the depth masking to finish.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Depth Mask > General \| Start	entry box, slider	The depth in the scene for the depth masking to start.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Backface Mask > General \| Enabled	checkbox	Whether the backface mask is turned on or not.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Fractal Noise Mask > General \| Invert	checkbox	If this is selected, the mask data is black on white rather than white on black.
<projector name> > Fractal Noise Mask > General \| Mask Curve	curve editor	Adjusts the fractal noise masking where white pixels are totally masked, black pixels are totally unmasked, and 50% gray is 50% masked.		You need to click either of the update buttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Fractal Noise Mask > General \| Enabled	checkbox	Whether the fractal noise mask is turned on or not.		When enabled, a icon displays in the status bar.
<projector name> > Fractal Noise Mask > General \| Mask Amount	entry box, slider	The amount that the mask affects the paint buffer. 1.0 means that the mask absolutely controls where you can paint; the effects of the mask decrease as the value gets lower.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Fractal Noise Mask > General \| Size	entry box, slider	Determines the size of the fractal noise features.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Fractal Noise Mask > General \| Roughness	entry box, slider	Determines the roughness of the fractal noise features.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Fractal Noise Mask > General \| Contrast	entry box, slider	Controls the level of contrast applied to the fractal noise features to derive the mask.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.
<projector name> > Fractal Noise Mask > General \| Seed	entry box, slider	Changes the pattern of the fractal noise by moving the pattern start point through 3D space.		You need to click either of the updatebuttons under Update to see the effect of your changes in the canvas. When you do, the equivalent global properties in the Painting palette are also updated.