You are here:

Lattice 1

The Lattice 1 texture is one of the many procedurally generated textures provided with Modo. Procedural textures are mathematically created at render-time and, therefore, have no fixed resolution. They can be magnified almost infinitely with no visual loss in detail. The Lattice 1 texture can be addressed by its two zones: the Background and Foreground colors. The texture modulates from one zone to the other based on your settings. Each zone can have either a Value or a Color and Alpha. The applied zone is dependent on the Layer Effects to which the texture is applied. For example, if you apply the texture as a Displacement, then Modo uses the Value settings, but if you set the texture effect to Diffuse Color, Modo uses the Color and Alpha settings for the Background and Foreground. This texture provides a lattice pattern with variable thickness, which can be used to texture nets or fences.

Note: For information about adding and working with Shader Tree item layers, see the Shader Tree topic.

Warning: Due to the nature of this texture, the default Solid projection method produces no result. When applied, you need to modify the projection in the associated Texture Locator to a different type. To select the Texture Locator, click the + icon preceding the layer's name in the Shader Tree and click the revealed layer. In the Properties panel change the Projection Type to a UV Map (recommended) or select a geometric projection (such as Planar, Cylindrical, or Spherical) and size the texture accordingly.

Layer Properties

Enable	Toggles the effect of the layer on and off. This duplicates the functionality of toggling visibility in the Shader Tree. When disabled, the layer has no effect on the shading of the scene. However, Modo saves disabled layers with the scene, and they are persistent across Modo sessions.
Invert	Inverts the colors (RGB values) for the layer to produce a negative effect.
Blend Mode	Affects the blending between different layers of the same effect type. With this, you can stack several layers for different effects. For more about blending, see Layer Blend Modes.
Opacity	Changes the transparency of the current layer. If there are layers below this layer in the Shader Tree, reducing this value increasingly reveals the lower layers. Reducing the value always dims the effect of the layer.
Locator	Sets the association for the Texture Locator. Most texture layers have a Texture Locator that Modo automatically creates in the Item List. This defines the mapping of the texture (how Modo applies the texture) to the surface. You can specify alternate locators, but this is normally not required. Although you may want multiple texture items to share a single locator.
Projection Type	Defines how a texture/material is applied to a 3D surface. Types vary significantly in their effects. For a guide to each Projection Type see Sorry you didn't find this helpful.
Projection Axis	The texture/material is projected down this axis. This applies to Planar, Cylindrical, Spherical, Cubic, Box, and, Light Probe projection types.

Lattice 1 Properties

Tiles - Lattice 1
Lattice Thickness	Determines the overall thickness of the lattice.
Size Controls
U Repeats	Determines the number of times the pattern repeats in the U direction (horizontally).
V Repeats	Determines the number of times the pattern repeats in the V direction (vertically).
Disturb Controls - Alters the look of the generated procedural. The noise layer distorts the base texture based on the Disturb Magnitude.
Disturb Noise Type	Specifies the look of the texture distortion, with several noise function types provided: • Perlin • Enhanced Perlin • Gradient • Value • Gradient Value • Impulse • Lattice • Bubble
Disturb Octaves	Specifies the number of layers of noise Modo uses when distorting the texture. This, in effect, produces greater detail and is similar to the Patch Levels setting.
Disturb Magnitude	Specifies the strength of the distortion effect on the base procedural.
Disturb Scale	Specifies the size (scale) of the distortion effect on the base procedural.
Disturb Detail	Specifies the step size between each iteration of the noise used to disturb the texture.
Full 3D Distortion	Turns on full 3D distortion, which yields better results, but a full 3D distortion takes longer to render.
Output Controls
Background Color/Value	Specifies the Color (or Value) of the texture's background area, which ramps toward the Foreground Color/Value.
Background Alpha	Specifies the Alpha transparency of the Background Color.
Background - Use Last Layer	When enabled, makes the Background Color area completely transparent to reveal the shading results of lower layers.
Foreground Color/Value	Specifies the Color (or Value) of the texture's foreground area, which ramps toward the Background Color/Value.
Foreground Alpha	Specifies the Alpha transparency of the Foreground Color.
Foreground - Use Last Layer	When enabled, makes the Foreground Color area completely transparent to reveal the shading results of lower layers.

Did you find this helpful?

Yes No

Sorry you didn't find this helpful

Why wasn't this helpful? (check all that apply)

Couldn't find what I was looking for

Instructions are confusing

Instructions didn't work

Title is misleading

Content is out-of-date

The translation is poor

Thanks for your feedback.

Want to tell us more?

Send an email to our documentation team.

Email us

That's great!

Thanks for taking time to give us feedback.

You are here: