Search is based on keyword.
Do not search with natural language
Ex: "How do I write a new procedure?"
Surfacing is the process of applying shading attributes to the 3D geometry in the scene. The various shading attributes make, for example, a surface red and shiny or dull and pitted, or any of the millions of variations a surface can posses. Surfacing in Modo uses a layer and mask based metaphor to assign these attributes to a surface.
Masks determine the area where the surfacing properties are applied. Within these masks the attributes are defined. This is similar conceptually to how silk-screening works for the garment industry. Take for instance the graphic on a t-shirt, each color on the shirt requires a new screen (mask) and when the next color (layer) is applied it supersedes the previous color where they overlap. Of course transparent ink could be used to allow the other colors to show through - this is the same in Modo too, changing a layer's transparency allows the lower layers to show through.
In order to create the mask that confines the surfacing to just the target area, a Polygon Tag needs to be defined. Polygon tags are simply user-defined labels associating any number of polygons together as a group. The tag definitions are stored in the geometry itself and can be easily recalled by Modo for a variety of purposes.
Modo does have several tag types but the main tag used for surfacing is the Material tag (Parts and Selection Set tags are the other types and offer additional functionality for layering materials for different effects, but that's getting ahead of ourselves). For Material tags, simply defining the tag prompts Modo to create the mask for the surfacing. When tagging geometry for surfacing in this way, the geometry itself determines the shape of the mask - when the model moves, so does the mask (with all surfacing going along for the ride as well).
So the important summary here is that Modo surfacing uses a simple mask and layered metaphor for surfacing and tags define the masks that limit that surfacing to the intended areas of the geometry. There are several steps to apply a tag to a surface.
Tip: To quickly select Materials, Parts, Selection Groups, or Selection Sets click the Select Polygon Tag icon below the menu bar. Make your selection from the dropdown menu.
|1.||To assign a tag, you first need some geometry in the scene. For example, create a default 1m sphere.|
|2.||In Polygons selection mode, select the target polygons you wish to apply the material to. Here, the upper half of the sphere has been selected. For information on making selections, see Selecting Items.|
|3.||With the selection active, choose the command Texture > Assign Material Group or press the M keyboard shortcut to open the Polygon Set Material dialog box. Here you define the Name of the tag as well as set some basic surfacing attributes.|
In the example, a red color has been used and the surface is named Sphere Top.
Note: You must change the name from Default, or the whole mesh will receive the material.
|4.||Click OK or press Enter. This assigns the tag to the selected polygons and defines a material in the Shader Tree.|
Click the Shading tab to see the Shader Tree and select Material view mode. You can see that a tag is added to the Materials panel showing the name that was defined, and a new material item has been added to it. If you can't see the material item, click the arrow widget next to the named tag to make it visible. Now, any changes made to this new material item are limited to only polygons in the scene with the tag Sphere Top.
Selecting the Material item layer in the Materials panel displays its associated attributes in the Properties panel for further editing.
In Shader Tree view mode, you can see the material with the other layers. The material is held in a Material Group with the name that you assigned to the material.
With the material group highlighted, select the Texture Layers tab in the properties and you can see that the Polygon Tag has been set to the name of the material. This ensures that only the polygons that are tagged with that name will receive the material.
The properties of the Material layer can be changed to adjust the color, reflection, and so on.
You can continue recursively adding additional material tags to define all the various surfaces in a scene in the same way, just remember that a polygon can only have a single Material tag at a time, so if you accidentally assign a second material, it overwrites the previous value. To fix this, select the offending polygon(s) and reassign the previous tag. If you wish to apply complex layering to materials, this requires additional alternative tag types (such as applying a label onto a bottle of wine). You can define these groupings through the addition of Part tags and Selection Sets.
Tip: In complex scenes, you should consider a strategy for assigning material tags to the various surfaces. Descriptive names are often better than cryptic ones. Consider the case of a car model. One naming scheme might title materials based on their type, such as Glass, Rubber, Leather, and Chrome. Another scheme might use the item itself, such as Windshield, Tire, Seat, and Bumper. Both examples are much better than Upper Front, Inside, Lower Left, and so on, because when you hand off a file or return to it at a later date, the descriptive names still make sense.
Material Tags have a procedural version that can be used in the Mesh Operations List. The Material Tag is located under Procedural > Polygon. The Material Tag has a Selection input to identify the polygons that are to receive the material.
Note: For information on the selection types, see Procedural Selection.
You need to set the Material Name in the Material Tag properties to associate the tag with a material in the Shader Tree. Unlike material tagging in direct modeling (as described above), a material is not automatically added to the Shader Tree. This means that applying materials with procedural tags is a two-stage process:
|1.||Creating a material tag containing a polygon selection, and assign a Material Name.|
|2.||Add a material group with a material to the Shader Tree, and set the group's Polygon Tag to match the procedural tag's Material Name.|
For a step-by-step example of how to use a procedural Material Tag, see Procedural Modeling Example.
Parts work in a similar fashion to Material tags, offering an additional means of defining polygon groupings. Parts can be a useful way to define additional surfacing layers in the Shader Tree, especially in cases where the surface layer spans across two or more Material tag boundaries. They can also be useful when exporting geometry to other applications. Parts can be easily defined in the following manner.
In Polygons mode, select the geometry you wish to assign the part tag to, in this case the lid of the teapot.
Choose the command Geometry > Polygon > Set Part to open the Polygon Set Part dialog box. You can assign a new name or use the dropdown context menu to choose an existing part tag from the list. Click OK or press the Return (or Enter) key on the keyboard to assign the Part tag to the selection.
Once applied, Part tags can be recalled in two ways. Firstly, by creating a Shader Tree Material Group item within its properties panel, you can define the Polygon Tag Type as a Part, and in the Polygon Tag dropdown menu, select the a part you defined in the previous step. When defined in this way, the effect of any Shader Tree items added to this group is confined to the polygons grouped by the tag, masking the layers in the same manner as a Material tag.
The second way to recall a Part is to use the Statistics viewport panel under the Lists tab. Within the viewport, under the Polygon > Part section, you can recall part selections by using the +/- buttons in the left column of the panel. In the example, clicking on the + symbol has activated the Teapot Lid selection. Clicking the - button deselects any polygons contained in that tag.
Tip: You can add tags to curve elements in the same way that tags are added to polygons. Select the Curve itself while in Polygons mode and apply the tags as demonstrated above. This can be useful when defining alternate or additional guides when styling a Fur Material layer.
Sorry you didn't find this helpful
Why wasn't this helpful? (check all that apply)
Thanks for your feedback.
If you can't find what you're looking for or you have a workflow question, please try Foundry Support.
If you have any thoughts on how we can improve our learning content, please email the Documentation team using the button below.
Thanks for taking time to give us feedback.