Inputs and Controls
|
Connection Type |
Connection Name |
Function |
|---|---|---|
| Input | unnamed | The image sequence to degrain. |
| mask | An optional image to use as a mask. By default, the grain reduction is limited to the non-black areas of the mask. At first, the mask input appears as triangle on the right side of the node, but when you drag it, it turns into an arrow labeled mask. If you cannot see the mask input, ensure that the mask control is disabled or set to none. |
|
Control (UI) |
Knob (Scripting) |
Default Value |
Function |
|---|---|---|---|
| DegrainSimple Tab | |||
| channels | channels | all | The channels to degrain. If you set this to something other than all, rgba, or rgb, the R blur, G blur, and B blur sliders below affect the first three channels in the selected layer. |
| R blur | rVal | 2 | The amount of grain to remove from the red channel. |
| G blur | gVal | 2 | The amount of grain to remove from the green channel. |
| B blur | bVal | 5 | The amount of grain to remove from the blue channel, which often is where most grain occurs. |
| mask | N/A | disabled | Enable the associated mask channel to the right. Disabling this checkbox is the same as setting the channel to none. |
| maskChannelInput | none | The channel to use as a mask. By default, the grain reduction is limited to the non-black areas of this channel. | |
| inject | inject | disabled | Copies the mask input to the predefined mask.a channel. Injecting the mask allows you to use the same mask further downstream. |
| invert | invert_mask | disabled | Inverts the use of the mask channel so that the grain reduction is limited to the non-white areas of the mask. |
| fringe | fringe | disabled | Blurs the edges of the mask. |
| mix | mix | 1 | Dissolves between the original image at 0 and the full grain reduction at 1. |