Search is based on keyword.
Do not search with natural language
Ex: "How do I write a new procedure?"
These pages guide you through installation and licensing to the point where you have the application in front of you and are ready to start work. After installation, all applications are run from either desktop icons, the browser, or from the command line using arguments.
Tip: For an overview of the documentation and quick access to the main topics, go to Nuke Home.
Qualified Operating Systems
• CentOS 7.4 (64-bit), or later
Note: The VFX Platform 2019 upgrade includes library versions that are only compatible with CentOS 7.4, or later. Nuke 12 is qualified on the Centos 7.4, 7.5, and 7.6 distributions.
Other operating systems may work, but have not been fully tested.
Minimum Hardware Requirements
• x86-64 processor, such as Intel Pentium 4 or AMD Athlon, with SSE3 instruction set support (or newer).
• 5 GB disk space available for caching and temporary files.
• At least 8 GB of RAM.
• Display with at least 1280 x 1024 pixel resolution and 24-bit color.
• Graphics card with at least 512 MB of video memory and driver support for OpenGL 2.0 (minimum requirement).
• To enable optional GPU acceleration of Viewer processing, you need OpenGL 2.0 with support for floating point textures and GLSL.
• To enable Nuke to calculate certain nodes using the GPU, there are some additional requirements. For more information, see Requirements for GPU Acceleration.
• R3D Rocket cards require the Rocket Driver 220.127.116.11 and Firmware 18.104.22.168 or later.
Note: To avoid graphical problems, such as text disappearing in the Viewer and Node Graph, it is important to keep your graphics card drivers up-to-date. Driver updates can be obtained from the websites of the graphics card manufacturers (for example, www.nvidia.com and support.amd.com).
Note: If you’re using R3D Rocket graphics card, note that using it in Nuke will most likely only be considerably faster when you’re reading in at full resolution. If you’re reading in at half resolution, for instance, using Nuke without the R3D Rocket card enabled may be faster. This is because the R3D Rocket graphics card is designed to be fast when reading in multiple frames at the same time. This is not how Nuke works internally, and therefore reads with the R3D Rocket card disabled may sometimes be faster when working in lower resolutions (< 4K widths). Note that the R3D Rocket card always produces better results than Nuke when downsampling. Also, the R3D Rocket card can only be used by one application at a time, so if you are viewing multiple Nuke scripts at once, you may only be able to use the R3D Rocket card in one.
If you want to enable Nuke to calculate certain nodes using the GPU, there are some additional requirements.
• An NVIDIA GPU with compute capability 3.0 (Kepler) or above. A list of the compute capabilities of NVIDIA GPUs is available at:
Note: The compute capability is a property of the GPU hardware and can't be altered by a software update.
• On Linux, driver versions 418.39 (Linux), or above is required.
Go to http://www.nvidia.com/Download/Find.aspx?lang=en-us for more information.
Note: If your computer enters sleep mode, the CUDA drivers cannot recover and you must restart Nuke to use GPU acceleration.
Tip: We recommend using the latest graphics drivers, where possible.
Note: Bit-wise equality between GPU and CPU holds in most cases, but for some operations there are limitations to the accuracy possible with this configuration.
An AMD GPU from the following list:
Note: OpenCL must be installed for Nuke to enable AMD GPUs. Use the following command to install OpenCL on Linux:
See https://www.amd.com/en/support for more information.
• Radeon™ RX 480
• Radeon™ Pro WX 7100
• Radeon™ Pro WX 9100
• Radeon™ Pro SSG
• Radeon™ Pro WX 8200
Note: Other AMD GPUs may work, but have not been fully tested. We recommend using the latest graphics drivers, where possible. For information on the recommended driver for each GPU, see https://www.amd.com/en/support
Nuke's GPU support includes an Enable multi-GPU support option. When enabled in the preferences, GPU processing is shared between the available GPUs for extra processing speed.
Note: Multi-GPU processing is only available for identical GPUs in the same machine. For example, two NVIDIA GeForce GTX 1080s or two AMD FirePro W9100s.
Sorry you didn't find this helpful
Why wasn't this helpful? (check all that apply)
Thanks for your feedback.
If you can't find what you're looking for or you have a workflow question, please try Foundry Support.
If you have any thoughts on how we can improve our learning content, please email the Documentation team using the button below.
Thanks for taking time to give us feedback.