Displays the GPU used for rendering when Use GPU if available is enabled. Local GPU displays Not available when:

• Use CPU is selected as the GPU device in the Preferences.

• no suitable GPU was found on your system.

• it was not possible to create a context for processing on the selected GPU, such as when there is not enough free memory available on the GPU.

You can select a different GPU device, if available, by navigating to the Preferences and selecting an alternative from the GPU Device dropdown.

Note:  Selecting a different GPU requires you to restart Nuke before the change takes effect.

When enabled, rendering occurs on the Local GPU specified, if available, rather than the CPU.

Note:  Enabling this option with no local GPU allows the script to run on the GPU whenever the script is opened on a machine that does have a GPU available.
You should also select this if you wish to render from the command line with the --gpu option.

See Nuke 15 Release Notes for more information on the GPUs Nuke supports.

Input

Sets the input projection type to convert from:

• LatLong - the most common full 360 frame projection. Many VR pipelines use latlongs for both ingest and export due to their simplicity and wide use.

• Cubemap - another full 360 projection. Each of the six faces is essentially rectilinear, so the data can be more familiar to work in.

• Rectilinear - a partial frame, standard projection you're most likely familiar with.

When you’re going to or from rectilinear, you’re only able to cover part of the frame (up to virtually 180 degrees).

• Fisheye - covers a number of projections, all of which emulate common optical models used in fisheye lenses. These are all partial frame projections, and so enable specific camera parameters similar to the Rectilinear projection type.

Sets how faces in the input cubemap are displayed:

• Image

• Views

• Faces

Note:  The Format control is only displayed when Projection is set to Cubemap.

Sets how faces are packed in a single image:

• LL-Cross

• 6x1

• 3x2

Note:  The Packing control is only displayed when Projection is set to Cubemap and Format is set to Image.

Sets the input rotation mode:

• Look - adds an directionInput widget to the Viewer allowing you to control the rig's look direction.

• From-To - adds fromInput and toInput widgets to the Viewer allowing you to transform the rig by moving the widgets around.

• Pan-Tilt-Roll - allows you to transform the rig using the Pan Tilt Roll controls.

• Rotation Angles - allows you to rotate the rig using the Rotation Order and Rotation Angles controls.

When Rotation is set to Pan-Tilt-Roll, allows you to transform the rig manually.

Output

Sets the output projection type to convert from:

• LatLong - the most common full 360 frame projection. Many VR pipelines use latlongs for both ingest and export due to their simplicity and wide use.

• Cubemap - another full 360 projection. Each of the six faces is essentially rectilinear, so the data can be more familiar to work in.

• Rectilinear - a partial frame, standard projection you're most likely familiar with.

When you’re going to or from rectilinear, you’re only able to cover part of the frame (up to virtually 180 degrees).

• Fisheye - covers a number of projections, all of which emulate common optical models used in fisheye lenses. These are all partial frame projections, and so enable specific camera parameters similar to the Rectilinear projection type.

Sets how faces in the output cubemap are displayed:

• Image

• Views

• Faces

Note:  The Format control is only displayed when Projection is set to Cubemap.

Sets how faces are packed in a single image:

• LL-Cross

• 6x1

• 3x2

Note:  The Packing control is only displayed when Projection is set to Cubemap and Format is set to Image.

Sets which face is output:

• +/-X

• +/-Y

• +/-Z

Note:  The Face control is only displayed when Projection is set to Cubemap and Format is set to Faces.

Sets the output rotation mode:

• Look - adds an directionInput widget to the Viewer allowing you to control the rig's look direction.

• From-To - adds fromInput and toInput widgets to the Viewer allowing you to transform the rig by moving the widgets around.

• Pan-Tilt-Roll - allows you to transform the rig using the Pan Tilt Roll controls.

• Rotation Angles - allows you to rotate the rig using the Rotation Order and Rotation Angles controls.

When Rotation is set to Pan-Tilt-Roll, allows you to transform the rig manually.

Sets how incoming metadata is handled:

• Ignore - any metadata present in the stream is passed downstream unaltered.

• Input - rotates the image according to the metadata in the stream and the total transform described by the controls in the C_SphericalTransform node.

Note:  This option assumes that the incoming image is in LatLong space.

• Input+Output - sets the output metadata to the sum of the input metadata and the total transform described by the controls in the C_SphericalTransform node, but does not modify the output image.

Select the filtering algorithm to use when remapping pixels from their original positions to new positions.

As a general guideline, the filters increase in quality at the cost of processing time as you move down the list. Bilinear filtering is the fastest and Lanczos the sharpest.

Sets which format to use or how to compute it starting from the input:

• To Format - force the specified input format as the output format. When using camera type projections, such as Rectilinear, the sensor size y parameter is ignored.

• To Width - the output format has the specified input width, but the height is computed according to the output Projection format ratio.

• To Scale - the output format width is computed from the input format width, and the height is computed according to the output Projection format ratio.

Sets the scaling factor to convert input width to output width.

Increases the size of the output image bounding box.

You might want to expand the bounding box if you need access to pixels at the edge of the image for nodes such as Blur or LensDistortion.

Click to swap the Input and Output control settings.

Export

Sets the export nodes to add to the Node Graph:

• C_SphericalTransform (Inverted Linked) - creates an expression linked C_SphericalTransform set to invert the current transforms.

This can be useful when switching between rectilinear and latlong to perform VFX tasks, such as roto.

• C_SphericalTransform (Concatenated) - sets the current C_SphericalTransform node to Input+Output mode and creates a second C_SphericalTransform node in Input mode.

This can be used to create incremental latlong rotations without introducing unnecessary filtering hits by passing only metadata downstream until the final C_SphericalTansform in the node tree performs the concatenated rotation.

Click to create the export specified in the export dropdown.

Camera Settings

Sets the input camera's distortion coefficient on the xyz axes.

Sets the input lens's center shift on the xy axes.

Sets the focal length used for the input cameras.

Sets the sensor size used for the input cameras.

Sets the camera Sensor and Focal automatically for the preset selected.

Sets the position of the input camera with respect to the center of the sphere.

Click to duplicate the values from the Output tab.

Camera Settings

Sets the output camera's distortion coefficient on the xyz axes.

Sets the output lens's center shift on the xy axes.

Sets the focal length used for the output cameras.

Sets the sensor size used for the output cameras.

Sets the camera Sensor and Focal automatically for the preset selected.

Set the position of the output camera with respect to the center of the sphere.