Layers Palette

The Layers palette and the controls that can be found on it are described in the table below. When controls also bring up additional dialogs, these are referenced for more information.

What It Does

The Layers palette lets you view, create and edit layers. You can also add the following to individual layers, or layer groups:

• masks

• adjustments

• procedurals

• shader layers

Note: For shader layers, the fields that are available to each shader are the same as those in the Shaders Palette section.

Layers Palette Fields

Control	Type	What it does	Notes
	dropdown, switch	Filter bar function that gives the choices: Name, Type, Attribute, and Color Tag. Depending on which filter option you select, the filter bar shows one of the following: • - filter for the type of layers by clicking on the associated icons. • - filter for the attributes of layers by clicking on the associated icons. • - filter for the color tags of the selected color button.	Both Type and Attribute provide icons that allow you to set the parameters for your filter. Quickly clear the text field by pressing the button.
	dropdown	Click to select from the blend mode options available for individual layers. To adjust the blend amount, enter the value into the text field, or adjust the slider located to the right of the blend mode menu. • - adjusts the blend mode amount.	This list does not include the advanced blend mode options.
	button	Opens the Advanced Blending menu, which gives options for blend modes and components, as well as blend amount.
	button	Click to toggle the selected layers’ visibility on the canvas.
	button	Denotes whether the layer is a paint layer and, when lit, whether it is selected as the current paint target.
	button	Denotes whether the layer is a mask layer and, when lit, whether the mask is selected as the current paint target.	Shift+click on the mask to disable it, or right-click on the layer and select Layer Mask > Disable Mask. The disabled mask button indicates the disabled state. To enable it, Shift+click on the mask again or select Layer Mask > Enable Mask from the right-click menu.
	button	Denotes whether the layer has a mask stack and, when lit, whether the mask stack is selected as the current layer.	Clicking on the button opens the mask stack palette.
	button	Specifies whether the layer is an adjustment layer or if the layer contains an adjustment, also called adjustment stack .
	button	Denotes whether the layer is a procedural layer and, when lit, whether the procedural is selected as the current layer.
	button	Specifies the layer is a material layer. When lit, the material is selected and when clicked, the node graph opens with the material's sub-graph.
	button	Denotes whether the layer is a graph layer and, when lit, whether the graph is selected as the current layer.
	button	Denotes whether the layer is the parent layer of a group.
	button	Locks or unlocks the selected layer. If the layer is the parent of a group of layers, all the layers in the group are also locked or unlocked. Clicking the padlock button when a layer is cached also unlocks it.
	button	Specifies that the layer is shared with another layer.
	button	Specifies that the layer is shared into the layer stack of another channel.
	button	Adds a new paint layer to the layer stack.
	button	Adds a mask to the selected layer or, if none is selected, the top layer in the layer stack.	If a mask has already been added to a layer, you cannot add a second mask using this method. You must create a mask stack using the right-click menu.
	button	Adds a mask stack to the selected layer, or if none is selected, the top layer in the layer stack.	Clicking on the mask stack button opens the mask stack palette.
	button	Adds an adjustment layer to the layer stack.	Select adjustments from the dropdown menu when you click the button.
	button	Adds an adjustment stack to the selected layer.	Select adjustments from the dropdown menu when you click the button. Clicking on the adjustment stack button opens the adjustment stack palette.
	button	Adds a procedural layer to the layer stack.	Select procedurals from the dropdown menu when you click the button.
	button	Adds a parent layer for a group to the layer stack. Additional layers can be added after the parent layer is created.
	button	Adds a graph layer to the layer stack and Node Graph.	See Adding Graph Layers.
	button	Duplicates the selected layer in the layer stack.	The duplicate has "copy" included in the name so that it can be differentiated from the original.
	button	Removes the selected layer from the layer stack.
	button	Adds a Multi-Channel layer to the layer stack.
	button	Assigns a color to the selected layers. To clear an already assigned color, click the button and select the gray color in the center of the palette. This effectively removes the color and returns it to the default color state.
Adjustment/Brightness
Brightness	text field, slider	Controls the brightness of the paint on the model.
Adjustment/Brightness Lookup
Map	curve editor	Adjusts the brightness to a specific lookup value using a curve map.
Adjustment/Clamp
Min	text field, slider	Clamps the minimum RGB value for the selected checkboxes below.
Max	text field, slider	Clamps the maximum RGB value for the selected checkboxes below.
Components \| R	checkbox	If enabled, specifies that the red channel should be affected by the Min and Max sliders.
Components \| G	checkbox	If enabled, specifies that the green channel should be affected by the Min and Max sliders.
Components \| B	checkbox	If enabled, specifies that the blue channel should be affected by the Min and Max sliders.
Components \| A	checkbox	If enabled, specifies that the alpha channel should be affected by the Min and Max sliders.
Adjustment/Color Balance
Preserve Luminosity	checkbox	Ensures that the luminosity value is maintained when other values are adjusted.
Highlights \| Cyan/Red	text field, slider	Adjusts the scale of the Red color component. Dragging the slider to the left pulls the scale towards cyan, whereas dragging the slider to the right pulls it towards red. The modification applies to the texture’s highlights.
Highlights \| Magenta/Green	text field, slider	Adjusts the Green color component. Dragging the slider to the left pulls the scale towards magenta, whereas dragging the slider to the right pulls it towards green. The modification applies to the texture’s highlights.
Highlights \| Yellow/Blue	text field, slider	Adjusts the Blue color component. Dragging the slider to the left pulls the scale towards yellow, whereas dragging the slider to the right pulls it towards blue. The modification applies to the texture’s highlights.
Shadows \| Cyan/Red	text field, slider	Adjusts the scale of the Red color component. Dragging the slider to the left pulls the scale towards cyan, whereas dragging the slider to the right pulls it towards red. The modification applies to the texture’s shadows.
Shadows \| Magenta/Green	text field, slider	Adjusts the Green color component. Dragging the slider to the left pulls the scale towards magenta, whereas dragging the slider to the right pulls it towards green. The modification applies to the texture’s shadows.
Shadows \| Yellow/Blue	text field, slider	Adjusts the Blue color component. Dragging the slider to the left pulls the scale towards yellow, whereas dragging the slider to the right pulls it towards blue. The modification applies to the texture’s shadows.
Midtones \| Cyan/Red	text field, slider	Adjusts the scale of the Red color component. Dragging the slider to the left pulls the scale towards cyan, whereas dragging the slider to the right pulls it towards red. The modification applies to the texture’s midtones
Midtones \| Magenta/Green	text field, slider	Adjusts the Green color component. Dragging the slider to the left pulls the scale towards magenta, whereas dragging the slider to the right pulls it towards green. The modification applies to the texture’s midtones
Midtones \| Yellow/Blue	text field, slider	Adjusts the Blue color component. Dragging the slider to the left pulls the scale towards yellow, whereas dragging the slider to the right pulls it towards blue. The modification applies to the texture’s midtones.
Adjustment/Color Lookup
Red	curve editor	Adjusts the value of the red channel for the overall layer stack, using the curve editor.
Green	curve editor	Adjusts the value of the green channel for the overall layer stack, using the curve editor.
Blue	curve editor	Adjusts the value of the blue channel for the overall layer stack, using the curve editor.
Adjustment/Color Switch
Red	checkbox	Turns the red channel on or off. Disabling the red channel removes it from the painting.
Green	checkbox	Turns the green channel on or off. Disabling the green channel removes it from the painting.
Blue	checkbox	Turns the blue channel on or off. Disabling the blue channel removes it from the painting.
Alpha	checkbox	Turns the alpha channel on or off. Disabling the alpha channel removes it from the painting.
Adjustment/Color to Mask
Color	swatch	Select a color from the color picker to convert that color to a mask. This allows a multicolored channel to be used for multiple masks.
Error	text field, slider	The tolerance level of the mask to the selected color. The lower the number, the closer the RGB value has to be to the selected color in order for it to be treated as a mask; the higher the number, the more variation that's allowed.
Adjustment/Contrast
Contrast	text field, slider	Adjusts the contrast for the layer stack.
Contrast Pivot	text field, slider	Sets the point around which Contrast is adjusted.
Adjustment/Copy Channel
Channel	dropdown	Copies the value from one RGB color channel to the other two. The result is a grayscale image with the intensity values from the selected channel.
Adjustment/Flow
Image\| Tile Image	file browser	Selects the image to use on the model for flow.
Image\| Repeat	text field, slider	Sets the repetition value of the tiled image.
Animation \| Animated	checkbox	Enables or disables the animation.
Animation\| Time Offset	text field, slider	Adjusts the flow over time to view the effect of vector paint.
Animation\| Speed	text field, slider	Adjusts the sensitivity of Time Offset to affect the speed of flow.
Adjustment/Gamma
Gamma	text field, slider	Adjusts the gamma levels in the layer stack.
Invert	text field, slider	Reverses the gamma conversion. That is, a higher setting for Gamma results in a more washed-out looking image.
Adjustment/Grade
Blackpoint	text field, slider	Sets the blackpoint of the RGB values.	Blackpoint is the color value at which the input is considered to be 100% black.
Whitepoint	text field, slider	Sets the whitepoint of the RGB values.	Whitepoint is the color value at which the input is considered to be 100% white.
Lift	text field, slider	Lifts the blackpoint, while keeping the whitepoint the same.
Gain	text field, slider	Adjusts the whitepoint, while keeping the blackpoint the same
Multiply	text field, slider	Multiplies the value to lighten the texture while preserving the blackpoint.
Offset	text field, slider	Specifies a fixed value to add in order to lighten the texture.	Adding negative values essentially darkens the texture.
Gamma	text field, slider	Adjusts the midtones, while keeping the whitepoint and blackpoint the same.
Adjustment/HSL
Hue Shift	text field, slider	Adjusts the hue, as tied to the HSL, for the layer stack.
Saturation Scale	text field, slider	Adjusts the saturation level, as tied to the HSL, for the layer stack.
Lightness Scale	text field, slider	Adjusts the lightness level, as tied to the HSL, for the layer stack.
Adjustment/HSV
Hue Shift	text field, slider	Adjusts the hue level, as tied to the HSV, for the layer stack.
Saturation Scale	text field, slider	Adjusts the saturation level, as tied to the HSV, for the layer stack.
Value Scale	text field, slider	Adjusts the value level, as tied to the HSV, for the layer stack.
Adjustment/Height As Normal
Bump Weight	text field, slider	Adjusts the sensitivity of the bump weight when calculating height as a normal value.
Bump Mode	dropdown	Displays the bump quickly (Fast) or accurately (Accurate).	By default, Bump Mode is set to Fast.
Bump Space	dropdown	UV - Normals are calculated relative to the UV coordinates space. The UV Bump Space mode is the more traditional approach but can lead to noticeable seams and color variations. World - Normals are calculated relative to the World coordinates space. Using the World Bump Space mode gives a more seamless result.	By default, Bump Space is set to UV.
Adjustment/Hue Shift
Hue	text field, slider	Changes the RGB hue value of the paint in the layer stack.
Adjustment/Invert
Red	checkbox	Inverts the contents of the red color component when checked. Uncheck the parameter to leave the component unchanged. If there is a significant amount of red paint in your layer stack the inverse is a significant absence of red.	It is uncommon that only one component would be selected, however if the need arises, you can choose to invert only one, or a subset, of the four components.
Green	checkbox	Inverts the contents of the green color component when checked. Uncheck the parameter to leave the component unchanged. If there is a significant amount of green paint in your layer stack the inverse is a significant absence of green.	It is uncommon that only one component would be selected, however if the need arises, you can choose to invert only one, or a subset, of the four components.
Blue	checkbox	Inverts the contents of the blue color component when checked. Uncheck the parameter to leave the component unchanged. If there is a significant amount of blue paint in your layer stack the inverse is a significant absence of blue.	It is uncommon that only one component would be selected, however if the need arises, you can choose to invert only one, or a subset, of the four components.
Alpha	checkbox	Inverts the contents of the alpha color component when checked. Uncheck the parameter to leave the component unchanged.	It is uncommon that only one component would be selected, however if the need arises, you can choose to invert only one, or a subset, of the four components.
Adjustment/Levels
Clamp		Set whether to: • Clamp Output Levels - to clamp the output values to between the white and blackpoints, • Clamp LDR - to clamp the output values to the 0-1 range, which is Byte black to white, or • Disable - to prevent Mari from clamping any of the levels.
Red	checkbox	Determines whether to apply the adjustment to the red component.
Green	checkbox	Determines whether to apply the adjustment to the green component.
Blue	checkbox	Determines whether to apply the adjustment to the blue component.
Output Level \| White	text field, slider	Adjusts the white level of the output in the paint for the selected color components.
Output Level \| Black	text field, slider	Adjusts the black level of the output in the paint for the selected color component.
Input Level \| Mid Mode	dropdown	Choose whether levels adjustments are made under Absolute or Relative mode. Absolute is the default mode for Mari; changing the mode to Relative changes the Input \| Mid point to be relative to the black and white points.
Input Level \| White	text field, slider	Adjusts the white level of the input for the selected color component.
Input Level \| Mid	text field, slider	Adjusts the midtone level of the input for the selected color components.
Input Level \| Black	text field, slider	Adjusts the black level of the input for the selected color component.
Adjustment/Luminosity
Adjustment/Premultiply Alpha
Unpremultiply	checkbox	Either pre- or post-multiplies the alpha in the selected image. If you are painting using an image without premultiplied alpha onto one with it, use this filter to perform the premultiplication, so the images match and you avoid lines around the outside of the patch. Post-multiply works the same, but in reverse: it removes premultiplication to match images that do not have premultiplied alpha.
Adjustment/Saturation
Saturation	text field, slider	Adjusts the color saturation of the paint in the layer stack.
Adjustment/Scale
R	text field, slider	Adjusts the scale of the Red color component. Dragging the slider to the left pulls the scale towards cyan, whereas dragging the slider to the right pulls it towards red.
G	text field, slider	Adjusts the Green color component. Dragging the slider to the left pulls the scale towards magenta, whereas dragging the slider to the right pulls it towards green.
B	text field, slider	Adjusts the Blue color component. Dragging the slider to the left pulls the scale towards yellow, whereas dragging the slider to the right pulls it towards blue.
A	text field, slider	Adjusts the Alpha component.
Adjustment/Set Value
Channel	dropdown	The options available in the dropdown menu are Red, Green, Blue, Alpha.
Value	text field, slider	Adjusting the slider modifies the value of the component selected from the dropdown menu above.
Adjustment/Shuffle
R	dropdown	Select a color component from the options r, g, b, and a in the dropdown menu to replace the Red component with another color. Setting r in the dropdown menu keeps the red color in the Red component.
G	dropdown	Select a color component from the options r, g, b, and a in the dropdown menu to replace the Green component with another color. Setting g in the dropdown menu keeps the green color in the Green component.
B	dropdown	Select a color component from the options r, g, b, and a in the dropdown menu to replace the Blue component with another color. Setting b in the dropdown menu keeps the blue color in the Blue component.
A	dropdown	Select a color component from the options r, g, b, and a in the dropdown menu to replace the Alpha component with another color. Setting a in the dropdown menu keeps the alpha color in the Alpha component.
Adjustment/Tangent To Screen
Suppress Blue	checkbox	Suppresses the blue value from the color-encoded vectors in screen space.
Adjustment/Tangent To World
Suppress Blue	checkbox	Suppresses the blue value from the color-encoded vectors in world space.
Adjustment/World To Tangent
Suppress Blue	checkbox	Suppresses the blue value from the color-encoded vectors in world space.
Flip Y	dropdown	Choose whether to Flip the Y axis normals or leave them as they are with normal.
Adjustment/sRGB2Linear
Invert	checkbox	Applies an sRGB to linear colorspace conversion. Checking Invert applies a linear to sRGB colorspace conversion.
Procedural/Basic/Color
Color	swatch	Applies the specified color from the color swatch to the entire model.
Procedural/Basic/Constant
Constant	text field, slider	Generates a constant number across the RGB or RGBA components that may be relied upon for mathematical operations.	This number ranges from 0 to 10,000, and defaults to 1.000.
Components	dropdown	Choose whether the contact applies to the RGB or RGBA components.
Procedural/Basic/Vector
X	text field, slider	Adjusts the values of the X axis, which correspond to the Red color component, to modify the color-encoded vectors.
Y	text field, slider	Adjusts the values of the Y axis, which correspond to the Green color component, to modify the color-encoded vectors.
Z	text field, slider	Adjusts the values of the Z axis, which correspond to the Blue color component, to modify the color-encoded vectors.
W	text field, slider	Adjusts the values of the W axis, which correspond to the Alpha component, to modify the color-encoded vectors.
Procedural/Projection/Cubemap
Cubic Image	text field, file browser	The environment image you want to be reflected.	This procedural cannot be cached or baked and is for display purposes only.
Falloff Start	text field, slider	Specifies where the cubic image starts.
Falloff End	text field, slider	Specifies where the cubic image ends.
Procedural/Projection/Cubemap Projector
Cubic Image	text field, file browser	Select or input the filepath to the .dds cubic image to project as a texture.	This procedural cannot be cached or baked and is for display purposes only. Note: When exporting .dds files, they should be encoded as 8.8.8.8 ARGB files to avoid any complications when bringing them into Mari.
Cull Backfaces	checkbox	When the checkbox is ticked, this setting ensures that projection does not affect areas facing away from the camera when factoring edge falloff.
Offset \| X	text field, incrementer	The offset of the projected image along the X axis. This affects the position of where the camera sits in the scene.
Offset \| Y	text field, incrementer	The offset of the projected image along the Y axis. This affects the position of where the camera sits in the scene.
Offset \| Z	text field, incrementer	The offset of the projected image along the Z axis. This affects the position of where the camera sits in the scene.
Rotation \| X	text field, slider	The rotation of the projected image along the X axis.	This rotates the camera for the entire scene, not just one part.
Rotation \| Y	text field, slider	The rotation of the projected image along the Y axis.	This rotates the camera for the entire scene, not just one part.
Rotation \| Z	text field, slider	The rotation of the projected image along the Z axis.	This rotates the camera for the entire scene, not just one part.
Edge Falloff \| Start	text field, slider	Modifies how far away the projection falloff starts on the model.
Edge Falloff \| End	text field, slider	Modifies how far away the projection falloff ends on the model.
Edge Falloff \| Curve	curve editor	Modifies the otherwise linear shape of the edge falloff to your desired shape.
Distance Falloff \| Start	text field, incrementer	Modifies the falloff start distance. From 0-100; 100 represents straight-on projection.
Distance Falloff \| End	text field, incrementer	Modifies the falloff end distance. From 0-100; 100 represents straight-on projection.
Distance Falloff \| Curve	curve editor	Modifies the otherwise linear shape of the distance falloff to your desired shape.
Procedural/Projection/Sphere Map
Sphere Map	file browser	The environment image you want to be reflected.	This procedural cannot be cached or baked and is for display purposes only.
Falloff Start	text field, slider	Specifies where the spherical image starts.
Falloff End	text field, file browser	Specifies where the spherical image ends.
Procedural/Projection/Sphere Map Projector
Spherical Image	file browser	Uses a spherical image of any file type as a texture to project onto the model. Select the filepath to the spherical image to project as a texture.
Cull Backfaces	checkbox	When the checkbox is ticked, this setting ensures that projection does not affect areas facing away from the camera when factoring edge falloff.
Offset \| X	text field, incrementer	The offset of the projected image along the X axis. This affects the position of where the camera sits in the scene.
Offset \| Y	text field, incrementer	The offset of the projected image along the Y axis. This affects the position of where the camera sits in the scene.
Offset \| Z	text field, incrementer	The offset of the projected image along the Z axis. This affects the position of where the camera sits in the scene.
Rotation \| X	text field, slider	The rotation of the projected image along the X axis.	This rotates the camera for the entire scene, not just one part.
Rotation \| Y	text field, slider	The rotation of the projected image along the Y axis.	This rotates the camera for the entire scene, not just one part.
Rotation \| Z	text field, slider	The rotation of the projected image along the Z axis.	This rotates the camera for the entire scene, not just one part.
Edge Falloff \| Start	text field, slider	Modifies how far away the projection falloff starts on the model.
Edge Falloff \| End	text field, slider	Modifies how far away the projection falloff ends on the model.
Edge Falloff \| Curve	curve editor	Modifies the otherwise linear shape of the edge falloff to your desired shape.
Distance Falloff \| Start	text field, incrementer	Modifies the falloff start distance. From 0-100; 100 represents straight-on projection.
Distance Falloff \| End	text field, incrementer	Modifies the falloff end distance. From 0-100; 100 represents straight-on projection.
Distance Falloff \| Curve	curve editor	Modifies the otherwise linear shape of the distance falloff to your desired shape.
Procedural/Projection/Triplanar Projection
World Scale	text field	Gives overall scale control for the image projection.
Top \| Top Image	file browser	Specifies the location of the image you want to project onto the top of your model.
Top \| Top Repeat	text field, slider	Specifies the frequency at which the image is repeated across the top of your model.
Top \| Top Angle	text field, slider	Specifies the rotation angle of the image on the top of your model.
Top \| Top U Offset	text field, slider	Specifies how much the image on the top of your model is offset by on the U axis.
Top \| Top V Offset	text field, slider	Specifies how much the image on the top of your model is offset by on the V axis.
Top \| Top U Scale	text field, slider	Specifies how much the image on the top of your model is stretched or contracted on the U axis.
Top \| Top V Scale	text field, slider	Specifies how much the image on the top of your model is stretched or contracted on the V axis.
Top \| Top Falloff Start	text field, slider	Controls where the image projection starts on the top of the model.
Top \| Top Falloff End	text field, slider	Controls where the image projection ends on the top of the model.
Top \| Top Falloff	curve editor	Controls the falloff of the image projection between the start and end values on the top of the model.
Front \| Front Image	file browser	Specifies the location of the image you want to project onto the front of your model.
Front \| Front Repeat	text field, slider	Specifies the frequency at which the image is repeated across the front of your model.
Front \| Front Angle	text field, slider	Specifies the rotation angle of the image on the front of your model.
Front \| Front U Offset	text field, slider	Specifies how much the image on the front of your model is offset by on the U axis.
Front \| Front V Offset	text field, slider	Specifies how much the image on the front of your model is offset by on the V axis.
Front \| Front U Scale	text field, slider	Specifies how much the image on the front of your model is stretched or contracted on the U axis.
Front \| Front V Scale	text field, slider	Specifies how much the image on the front of your model is stretched or contracted on the V axis.
Front \| Front Falloff Start	text field, slider	Controls where the image projection starts on the front of the model.
Front \| Front Falloff End	text field, slider	Controls where the image projection ends on the front of the model.
Front \| Front Falloff	curve editor	Controls the falloff of the image projection between the start and end values on the front of the model.
Right \| Right Image	file browser	Specifies the location of the image you want to project onto the side of your model.
Right \| Right Repeat	text field, slider	Specifies the frequency at which the image is repeated across the side of your model.
Right \| Right Angle	text field, slider	Specifies the rotation angle of the image on the side of your model.
Right \| Right U Offset	text field, slider	Specifies how much the image on the side of your model is offset by on the U axis.
Right \| Right V Offset	text field, slider	Specifies how much the image on the side of your model is offset by on the V axis.
Right \| Right U Scale	text field, slider	Specifies how much the image on the side of your model is stretched or contracted on the U axis.
Right \| Right V Scale	text field, slider	Specifies how much the image on the side of your model is stretched or contracted on the V axis.
Right \| Right Falloff Start	text field, slider	Controls where the image projection starts on the side of the model.
Right \| Right Falloff End	text field, slider	Controls where the image projection ends on the side of the model.
Right \| Right Falloff	curve editor	Controls the falloff of the image projection between the start and end values on the side of the model.
Procedural/Lighting/Environment Light
Sharpness	text field, slider	Adjusts the sharpness of the reflections on the model, with higher values increasing the sharpness and lower values decreasing it.	This procedural cannot be cached or baked and is for display purposes only.
Procedural/Geometry/Ambient Occlusion
Procedural/Geometry/BiTangent
Procedural/Geometry/Geo-Channel
Channels	dropdown box	Selects a geo-channel for the selected Geo-channel layer.
Background Color	swatch	Adds a background color to the Geo-channel.	This is useful when you have a geometry that has UDIMS 1001-1003, but your Geo-channel only has 1001-1002. 1003 is filled with the background color in this instance.
Procedural/Geometry/Position
Procedural/Geometry/Selection Mask
Procedural/Geometry/Surface Normal
Procedural/Geometry/Tangent
Procedural/Geometry/UDIM Mask
UDIM	text field	Enter the UDIM number of the UDIM you want to unmask.
Procedural/Geometry/UV
Procedural/Geometry/UV Mask
Procedural/Procedural/Fractal/Cloud
Size	text field, slider	Adjusts the size of the cloud pattern.
Roughness	text field, slider	Adjusts the roughness of the cloud pattern. Dragging the slider to lower values smooths out the transition from color A to color B.
Offsets \| X Offset	text field, slider	Moves the pattern across the model on the x axis.
Offsets \| Y Offset	text field, slider	Moves the pattern across the model on the y axis.
Offsets \| Z Offset	text field, slider	Moves the pattern across the model on the z axis.
Color \| Color A	swatch	Sets the color to be used for the pattern’s A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s B input.
Procedural/Procedural/Fractal/Turbulence
Size	text field, slider	Adjusts the size of the turbulence pattern.
Roughness	text field, slider	Adjusts the roughness of the turbulence pattern. Dragging the slider to lower values smooths out the transition from color A to color B.
Color \| Color A	swatch	Sets the color to be used for the pattern’s A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s B input.
Procedural/Procedural/Misc/Oil
Size	text field, slider	Adjusts the size of the oil pattern.
Organicness	text field, slider	Sets the overall organic quality of the oil pattern.
Roughness	text field, slider	Adjusts the roughness of the oil pattern. Dragging the slider to lower values smooths out the transition from color A to color B.
Color \| Color A	swatch	Sets the color to be used for the pattern’s A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s B input.
Procedural/Procedural/Noise/Cellular
Size	text field, slider	Adjusts the size of the cellular pattern.
Type	dropdown	Sets how color A and color B are used in the pattern.
Distance Method	dropdown	Changes the shape of the cells to affect the distance the cells are from each other.
Color \| Color A	swatch	Sets the color to be used to the pattern’s color A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s color B input.
Procedural/Procedural/Noise/Perlin
Size	text field, slider	Adjusts the size of the noise pattern.
Color \| Color A	swatch	Sets the color to be used for the pattern’s color A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s color B input.
Procedural/Procedural/Noise/Squiggle
Size	text field, slider	Adjusts the size of the squiggle pattern.
Color \| Color A	swatch	Sets the color to be used for the pattern’s color A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s color B input.
Procedural/Procedural/ Pattern/Cube
Repeat	text field, slider	Specifies the repetition frequency of the cube pattern.
Gap	text field, slider	Sets the spacing between the cubes in the pattern.
Fall Off	text field, slider	Adjusts the falloff amount between the cubes.
Roundness	text field, slider	Adjusts how much the cubes are rounded off.
Color \| Color A	swatch	Sets the color to be used for the pattern’s color A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s color B input.
Procedural/Procedural/Pattern/Object Space Linear Gradient
Start	text field, slider	Sets the start point on the object for Color B of the gradient.
End	text field, slider	Sets the end point of Color B, where Color A begins, on the object of the gradient.
Map	curve editor	Set the color A and color B transitions for the gradient using points on a curve.
Rotation \| X	text field, slider	Adjusts how the gradient appears on the model by rotating the gradient on the X axis.
Rotation \| Y	text field, slider	Adjusts how the gradient appears on the model by rotating the gradient on the Y axis.
Rotation \| Z	text field, slider	Adjusts how the gradient appears on the model by rotating the gradient on the Z axis.
Color \| Color A	swatch	Sets the color to be used for the gradient’s A input.
Color \| Color B	swatch	Sets the color to be used for the gradient’s B input.
Procedural/Procedural/Pattern/Sphere
Size	text field, slider	Adjusts the size of the spherical pattern.
Falloff	curve editor	Adjusts the falloff amount between the spheres.
Color \| Color A	swatch	Sets the color to be used for the pattern’s color A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s color B input.
Procedural/Procedural/Pattern/Tiled
Tile Image	file browser	The image you want to have tiled across the model.
Rotation Angle (Degrees)	text field, slider	Changes the angle of rotation for the tiled image.
Offset \| U Offset	text field, slider	Specifies how much the image is offset by on the U axis.
Offset \| V Offset	text field, slider	Specifies how much the image is offset by on the V axis.
Repeat \| U Repeat	text field, slider	Specifies how much the image is repeated on the U axis.
Repeat \| V Repeat	text field, slider	Specifies how much the image is repeated on the V axis.
Mirror \| Mirror U	text field, slider	Sets whether the tiled image is mirrored on the U axis.
Mirror \| Mirror V	text field, slider	Sets whether the tiled image is mirrored on the V axis.
Procedural/Procedural/Pattern/UV Grid
Color	swatch	Sets the color to be used for the grid lines.
Repeat	text field, slider	Specifies the repeat rate for the grid on the model’s surface.
Thickness	text field, slider	Sets the thickness of the grid lines.
Procedural/Procedural/Pattern/UV Linear Gradient
Start	text field, slider	Sets the start point on the UV patches for Color B of the gradient.
End	text field, slider	Sets the end point of Color B, where Color A begins, on the UV patches of the gradient.
Map	curve editor	Set the color A and color B transitions for the gradient in UV space using points on a curve.
Angle	text field, slider	Specifies the angle of the linear gradient on the UV patches.
Repeat	text field, slider	Sets how much the linear gradient is repeated across the UV patches.
Color \| Color A	swatch	Sets the color to be used for the gradient’s A input.
Color \| Color B	swatch	Sets the color to be used for the gradient’s B input.
Procedural/Procedural/Plant/Wood
Size	text field, slider	Adjusts the size of the wood pattern across the entire model.
Bands	text field, slider	Adjusts the size of the individual bands in the wood pattern.
Noise \| Size	text field, slider	Adjusts the amount of the noise in the bands of the wood pattern.
Noise \| Roughness	text field, slider	Adjusts the roughness of the wood pattern. Dragging the slider to lower values makes the transition from color A to color B more distinct.
Stretch \| X	text field, slider	Stretches the wood pattern across the model on the x axis.
Stretch \| Y	text field, slider	Stretches the wood pattern across the model on the y axis.
Stretch \| Z	text field, slider	Stretches the wood pattern across the model on the z axis.
Color \| Color A	swatch	Sets the color to be used for the pattern’s color A input.
Color \| Color B	swatch	Sets the color to be used for the pattern’s color B input.